Atlanta Chinese Drywall

Drywall shortages during the building boom in 2004 and 2006 prompted many builders to buy drywall from China. Hundreds of millions of sheets of Chinese drywall were imported during this time. It is estimated that Georgia received over 6,050,370 lbs of the drywall. This equates to approximately 67,000 sheets of wallboard, enough drywall to build 670 single family homes.

It has been determined that compounds from this product may contain butanethial, carbonyl sulfide, hydrogen sulfide, and strontium sulfide. The EPA (Environmental Protection Agency) has declared many of these compounds to be toxic. The Florida Department of Health states that the levels found in Chinese drywall are not high enough to present an imminent or chronic health hazard at this time. It has not yet been determined if long term exposure is harmful. Many homeowners have been reporting physical ailments such as irritated eyes, sneezing, sinus problems, sore throats, asthma related symptoms, nosebleed, fatigue, headaches, and other unexplained symptoms, as well as an unusual odor in their homes similar to rotten eggs or ammonia.

This drywall has also been found to corrode electrical wiring, copper water lines, brass and silver hardware, and plumbing fixtures. Electrical failures, A/C failures, and tarnished plumbing fixtures are all indications that you have Chinese drywall.

Visual inspection and material testing are the best approach if you suspect your home to have the tainted drywall. Material testing requires a sample of the drywall to be taken and submitted to an accredited laboratory for analysis. This is the most accurate method to test for the drywall. Proper documentation is key in successful Chinese drywall investigations. This requires a thorough investigation to document exposed metal components and the extent of their exposure to the corrosive vapor. The subjective margin of error increases in homes with low vapor levels and/or just a few sheets of Chinese drywall installed. It is most important to have a third party inspect your home or commercial property.

If you think you have Chinese drywall, perform your own visual test first. Click here for the Department of Health Step-By-Step Self-Assessment Guide for signs that a home may be affected by drywall imported by China.

After you conduct your own test and think you may have the drywall, call your builder. Many builders are accepting responsibility and have action plans in place to remediate Chinese drywall. If they don’t respond appropriately, then it’s time to call an expert. Many inspection companies will argue that you should have your home inspected prior to contacting your builder. This is up to you. If your builder has a history of not taking responsibility for warranty issues, then it may be a good idea to gather evidence prior to contact. Either way, it is very important to get a third party involved to document the contamination. Proper documentation and confirmed laboratory results are your best defense against your builder.

There are multiple detection methods available to identify Chinese drywall, but be aware that air sampling has been found to be ineffective in detecting these marker compounds. We recommend bulk testing in all cases. The Fourier Transformed Infrared Technology (FTIR) test is a chemically-specific analysis technique that identifies chemicals and compounds within drywall.

This graphic demonstrates the ability to identify Chinese drywall using Fourier Transformed Infrared Spectroscopy (FT-IR). This test has been proven to be the most accurate, precise, and reliable data for Chinese drywall identification. The other test is a corrosion test. This involves taking copper tokens (slugs) and a piece of the suspect drywall and placing both in a sealed container in a controlled laboratory environmental chamber. The corrosion test has >98% correlation with the FTIR test. Both tests are considered relevant in a ligation case and will require removing a 2” x 2” sample from several locations throughout the home.

Be leery of fly-by-night inspectors offering low cost inspections. Be sure to hire reputable inspection firms. Your inspection report and laboratory results will be the basis of your claim in a litigation case. Building Diagnostics Group performs Chinese drywall inspections throughout the southeastern United States. We have the proven process and the experience in many types of construction litigation projects.

Our Atlanta Georgia office services all of Metro Atlanta including; Cumming, Alpharetta, Marietta, Smyrna, Lawrenceville, Gainesville, Duluth, Buford, Woodstock, Norcross, Roswell, Powder Springs, McDonough, Athens, Suwanee, Buckhead, Sandy Springs, and all other areas in and around the Metro Atlanta area.

Contact our Atlanta office today for more information (404) 946-9939.

isoosi web directory